Alde Bubble Leak Detector: https://amzn.to/31g6Qb7 Insulation cutting jigsaw blades: https://amzn.to/31fKKW6 14 weeks into the build, so an update for the last 3 weeks… – Re-did the kitchen worktop, concrete look formica top. Had to edge in t-trim knock on edging as the PVC trim we wanted to use just didn’t…
Our design was always not to use the cab seats, which many told us was wrong. But not using them allows us to have an uncompromised L shaped sofa, convertible to U sofa, and convertible to bed. Everyone is different, this works for us, and its probably the most snug…
11 weeks in. Getting tough now, pretty much full time on it – so lots of hours! Couple of disasters – make worktop and fitting the top laminate and the wind caught it and stuck wrong… Damn it. (also buggered the spare). Had to buy new ply (expensive lightwight stuff)…
8 weeks in. We’re knackered lol. We’ve been pretty much full time at it, and for sure, there are quicker/simpler ways to build than the way we are doing it. Its a balance! In summary, in weeks 6-8 we’ve done:- Front bulkhead made (with removable door) Offside window completed Water…
5 weeks in. Seems a lot has gone on, and can’t really remember the first couple of weeks! In this timeframe, we’ve:- Removed headlining and insulated cab (see HERE ) . Right b*tch of a job… Built main walls and fixed to bonded battens Part built garage – habitation walls…
Well that was a nice and easy job! OK, the first part was – getting the headlining out was simple – see video – easy to do. Getting it back was fine, just a tip not in video – when putting the lower shelf in, you need to squeeze the…
Blimey. Reminds me how tough it is! But this time, my not-so-young apprentice is helping, so thats really good. Doesn’t save much time as there are a lot of lessons on new tools and the like, but its great to have room to work as a team. We were supposed…
Blimey – this should’ve been a mornings job, but it took all day, hopefully our experiences will help! As van is new, we didn’t want to make any changes that may affect warranty, so we bought a Brink tow bar and 7-pin dedicated wiring kit from PF Jones. Top tip:…
This was another new job for me – never had or seen an air suspension kit before! The reason for having it is to give a better less clashy ride and allow us to have a level van with no tail sag. Air assistance kits come with various features at…
Well, fitting an electric step is the first drilling of the van… We would not have installed this early but Mels foot issues means she can’t get in without help – so step had to go on first. Electrically, just bodged with a PP3 battery until the 12v system is…